Spray RP7 on seized or stiff joints, nuts, bolts etc. Allow 5 minutes to penetrate and if necessary tap lightly. Repeat application if needed in severe cases. Use RP7 as a general purpose lubricant - eliminate squeaks and keep mechanisms functioning smoothly.
The duration of protection obtained using RP7 will vary depending on the type of material being protected and the conditions of exposure.
To start wet motors: (cars, boats, mowers, etc.)
Remove distributor cap, wipe with a dry rag if soiled
and then spray with RP7. Replace cap and spray around distributor cap, spark plugs, coil, generator, starter motor, leads etc.
Use only in well ventilated area
Intentional misuse by deliberately concentrating and inhaling contents can be harmful or fatal.