Dulux Paint Weathershield Powerflexx 5L Exterior Paint

Dulux Weathershield Powerflexx Exterior Wall Finish provides ultimate protection from cracks and any weather attack with groundbreaking innovations.

Special features

• Keep Cool
• Covers hairline cracks
• Colourlock technology
• Anti-Fungus & algae
• Low VOC, low odour
• Low dirt pick-up technology
• Water-resistant, flexible & long lasting protection
• Excellent alkali resistence

Number of coats: 2 coats

Usage Details

Preparing the surfaces:

Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Fungicidal Wash. Make good minor defects with a suitable exterior grade Filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further. Note: Do not apply Dulux Weathershield Powerflexx during wet weather.

Painting:

Roller or brush

Cleaning:

Clean all equipment with clean water immediately after use.

Storing:

Keep away from food, drinks and animal feed. Store in a cool and shaded place.