DULUX PAINT
Sort by
Show result
  • Crack and rain proof
  • Heat reflective property, reduces surface temperature by up to 5ºC#
  • Protects against colour fading caused by UV
  • Fungus & algae resistance
  • Low odour, even when freshly painted
  • Environmentally preferred paint
RM655.00

Key Information
 Finish Low Sheen
 Coverage ≈ 13 m²/L
 Drying Time Single coat at standard thickness: Dependant on temperature and humidity. 2-3 hours
 Coats 2

Product Description
Dulux Weathershield Powerflexx Exterior Wall Finish provides ultimate protection from cracks and any weather attack with groundbreaking innovations.

Hazard warnings

Keep out of the reach of children. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Dulux Product Safety Data Sheet for further details.

Product Features

KeepCool™ Covers hairline cracks 
Colourlock technology
 Anti-Fungus & algae Low VOC, low odour 
Low dirt pick-up technology 
Water-resistant, flexible & long lasting protection 
Flexible paint film 
Excellent alkali resistence 
Promotes attractive soft sheen finish

Tips & Advice
Preparing the Surfaces
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Fungicidal Wash. Make good minor defects with a suitable exterior grade Filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further. Note: Do not apply Dulux Weathershield Powerflexx during wet weather.

RM145.00
RM166.00
  • Keep Cool™ heat reflective property, reduces surface temperature by up to 5ºC
  • Superior alkali protection
  • Protects against colour fading caused by UV
  • Fungus & algae resistance
  • Dirt guard and stays clean longer
  • 5 years warranty*
RM125.00
RM143.00
  • Keep Cool™ heat reflective property, reduces surface temperature by up to 5ºC
  • Superior alkali protection
  • Protects against colour fading caused by UV
  • Fungus & algae resistance
  • Dirt guard and stays clean longer
  • 5 years warranty*
RM360.00
RM396.00
  • Formulated to meet economical needs
  • Suitable for interior walls and ceiling
  • Matt Finished
RM35.00
RM55.00
  • Waterbased masonry sealer
  • Premium quality
  • Suitable for interior and exterior masonry surface such as brickwork, plaster, cement
  • Theoretical coverage 8-10 m2/litre
  • Ensures excellent alkali resistance
  • Minimizes the risk of efflorescence and seals off the substrate
RM135.00
  • Waterbased masonry sealer
  • Premium quality
  • Suitable for interior and exterior masonry surface such as brickwork, plaster, cement
  • Theoretical coverage 8-10 m2/litre
  • Ensures excellent alkali resistance
  • Minimizes the risk of efflorescence and seals off the substrate
RM412.00
  • Formulated to meet economical needs
  • Suitable for interior walls and ceiling
  • Matt Finished
RM78.00
RM95.00